Skip to content
Centerline Inc. logoCENTERLINE.
Centerlinespindle-repair1 min read

Spindle Repair and On-Site Taper Grinding

Martin Engster explains Centerline's 'tripod' — spindle repair, on-site taper grinding, and making parts — and when on-site grinding can keep you running.

Spindle Repair and On-Site Taper Grinding

I like to say Centerline is a tripod. We stand on three legs.

Leg one is spindle repair — anything to do with spindles.

Leg two is on-site taper grinding. If your spindle isn't making good parts, we can come to you and clean up the front taper. Is that a full fix? Not always — sometimes it's a band-aid. But it can keep you running until your busy time slows down and you can send the spindle in for a full repair.

Leg three is making parts. More on that soon.

Which one does your shop need right now?

Watch & Listen

Related articles

Be a Doctor, Not a Mortician: My Conversation with Boe Due
vlog

Be a Doctor, Not a Mortician: My Conversation with Boe Due

On Maintenance & Manufacturing Insights, I talk with Boe Due — general manager of Bitec SMI, an aerospace CNC shop in Dayton, Ohio — about moving small and mid-sized shops from reactive to preventive maintenance, why most shops have no real PM program, and putting the right expert in the right seat.

Read →
Who Owns the Problem? My Conversation with David Craig
vlog

Who Owns the Problem? My Conversation with David Craig

On Maintenance & Manufacturing Insights, I talk with David Craig — founder and CEO of Prodigy IQ Technologies and a 20-year manufacturing veteran — about why most plants don't have a detection problem, they have a handoff problem, how an 18-hour shift led to 4,000 defective parts, and why AI is a multiplier, not a magic fix.

Read →
The Power of Planning Ahead: My Conversation with Richard Horn
vlog

The Power of Planning Ahead: My Conversation with Richard Horn

On Maintenance & Manufacturing Insights, I talk with Richard Horn, a production supervisor at Ford Motor Company, about keeping high-volume automotive lines running — how producing 1,200 extra parts one day bought his team a day and a half when a stamping die broke, why cleanliness speeds up troubleshooting, and the growing shortage of skilled tradespeople.

Read →